A U-Boot Independent Standalone Application

U-Boot allows you to load your own applications at the console. The application already has the hardware interfaces available for use (u-boot does it), and everything does not need to be brought up from scratch.

It comes with a sample hello_world program at u-boot/examples/standalone/hello_world.c, which is supposed to print stuff to console. It depends on U-Boot interfaces, but by tracing back the source code, it can be easily re-written to have nothing to do with the U-Boot API.

In the end, hello_world.c:printf()’s job is to write the characters to UART’s address. Implementing this on a BeagleBone Black is pretty easy:

The ARM AM335x TRM mentions the address-offsets of all registers available with the processor. The UART0_BASE is defined at 0x44E09000. Memory mapped registers need to be kept volatile to prevent compiler optimizing them away.

Here’s the code:

Compile it similarly to U-Boot’s examples to get a .bin.

To execute it, you can either: 1) copy the SREC over serial, 2) set up TFTP or 3) put it on an sdcard

The load_address below is an env var that specifies where the application will be loaded. It can be changed when building U-Boot.
For the current build, find it from the console using

U-Boot# printenv

U-Boot# fatload mmc 0 <load_address>
[...]

The entry point’s address of the application can be found by looking at the objdump. See this if you have larger applications.
Launching it,

U-Boot# go <entry_point_address>


If you plan to write a purely standalone binary, you are required to initialize the hardware manually and provide a functioning C execution environment. It also requires information regarding placement and relocation of the text and data segments, allocation and zeroing of BSS segment and placement of the stack space. See this and this.


Advertisements

2 thoughts on “A U-Boot Independent Standalone Application”

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s